FEITUO Emergency Lighting Certification and Compliance Overview

For life-safety lighting products such as emergency lights and exit signs, compliance documentation is an important part of market access. It is also one of the key elements reviewed by overseas brand owners, importers, distributors, electrical contractors and commercial lighting customers when assessing a manufacturing partner.

NINGBO FEITUO ELECTRIC APPLIANCE CO., LTD., operating under the FEITUO brand, has extensive experience in the development, manufacturing and international supply of emergency lighting products. To address the different regulatory requirements of overseas markets, FEITUO manages compliance documentation according to the destination market, the specific product model and the actual product configuration.

Every emergency lighting product exported by FEITUO is supported by the relevant certification, testing or compliance documentation required for its destination market, product model and agreed project conditions. During product selection, supplier qualification, order confirmation and project documentation review, FEITUO can provide customers with the corresponding certificate copies, test documentation and technical files. Our team can also assist customers in confirming whether the documents cover the exact models and configurations being supplied.

Different markets apply different regulations and certification systems. Therefore, not every model is required to carry UL, CE and FCC documentation at the same time. FEITUO matches the appropriate compliance documentation to each exported product according to its destination market, function, configuration and customer requirements.

UL Certification Documentation for the United States and Canada

Selected FEITUO emergency lighting products intended for the North American market have been evaluated under UL Solutions certification programs. The U.S. UL Certificate Number is UL-US-2435914-0, and the corresponding Report Reference is E464915-20240914. The product category stated on the certificate is Emergency Lighting and Power Equipment. The applicable standard is:

UL 924, Edition 10, Issue Date 2016-05-09, Revision Date 2022-12-14

UL 924 is an important U.S. safety standard for emergency lighting and related power equipment. The certificate addendum identifies Unit Equipment models including FT-STN1-W, FT-STN1-W-HO, FT-STN1-W-RC, JLEU5-E, JLEU9-E and JLEU15-E, together with selected model variants.

For the Canadian market, the UL Certificate Number is UL-CA-2427626-0. The corresponding Report Reference is also E464915-20240914. The product category is identified as Emergency Lighting and Power Equipment Certified for Canada. The applicable standard is:

CSA C22.2 No. 141, Edition 6, Issue Date 2024-04

Customers can search file number E464915 through the official UL Solutions Product iQ record. The Canadian certification record can also be checked through UL Product iQ Canada.

UL certification has a clearly defined product and model scope. Final applicability must be verified against the official UL database, the certificate addendum, the product marking and the actual model being shipped. Only products covered by the UL certification scope and bearing the appropriate UL Mark should be identified as UL Certified.

CE LVD Compliance Documentation for an Exit Sign

FEITUO Exit Sign model 2917 is covered by a Certificate of Conformity related to the European Union Low Voltage Directive. The Certificate Number is ENB2312180102S00101C. The certificate refers to Low Voltage Directive 2014/35/EU and lists the following standards:

● EN IEC 60598-1:2021+A11:2022

● EN IEC 60598-2-1:2021

● EN 60598-2-22:2014+A1:2020

● EN 62493:2015+A1:2022

EN IEC 60598-1 addresses general requirements and safety testing for luminaires. EN IEC 60598-2-1 applies to fixed general-purpose luminaires. EN 60598-2-22 specifies particular requirements for emergency lighting luminaires, while EN 62493 relates to the assessment of lighting equipment concerning human exposure to electromagnetic fields.

The document indicates that the sample and model identified on the certificate were tested and evaluated according to the listed standards. Its scope should be determined by the product name, model number, technical data and supporting test report stated in the document. It should not be extended to products or configurations that are not included within that scope.

FCC Compliance Documentation for an LED Emergency Light

FEITUO LED Emergency Light model JLEU9-CEC is covered by an FCC Certificate of Conformity. The Certificate Number is ENB2504250012E00201C. The standards and measurement procedures stated on the certificate are:

● FCC CFR Title 47, Part 15, Subpart B

● ANSI C63.4-2014

FCC CFR Title 47, Part 15, Subpart B addresses radio-frequency interference requirements for unintentional radiators. ANSI C63.4-2014 provides measurement procedures for radio-noise emissions from low-voltage electrical and electronic equipment.

This FCC document indicates that the model specified on the certificate was tested and evaluated according to the listed requirements and measurement procedures. As the document does not represent authorization for an intentional wireless transmitter, it should not be described as an FCC ID or wireless-transmitter certification.

Official Verification

FEITUO recognizes that certification documents must be authentic and traceable. In addition to providing certificate copies to customers, the relevant information can be checked through the official online platforms of the issuing or certification organizations.

● UL Solutions Product iQ: search file number E464915; U.S. Certificate Number UL-US-2435914-0; Canadian Certificate Number UL-CA-2427626-0.

● CE Certificate Number: ENB2312180102S00101C.

● FCC Certificate Number: ENB2504250012E00201C.

The CE and FCC records can be checked through the official EMTEK Certificate Search portal by entering the applicable certificate number. Some databases may require registration, login or verification before complete information can be accessed. The actual search procedure is subject to the instructions displayed by the official platform.

Matching Documentation to Exported Products

FEITUO manages certification documents in relation to the actual products being exported. When preparing an overseas emergency lighting order, FEITUO considers:

 The country or region where the product will be sold or installed;

1. Whether the product is an Emergency Light, Exit Sign or another emergency lighting product;

2. The exact model, input voltage, wattage, installation method and functional configuration;

3. Private-label, OEM or ODM requirements;

4. Project tender, supplier audit and market-entry requirements;

5. Consistency between the certificate, test report, product label and shipped product.

If a customer has specific certification requirements or requires a particular version of a standard, FEITUO recommends confirming these requirements before sample approval or order confirmation. Our sales, engineering and quality teams can assist in reviewing the model number, technical parameters and supporting documentation to reduce the risk of discrepancies during project approval or market-entry review.

Documentation Support for Overseas Customers

FEITUO serves overseas brand owners, importers, distributors, electrical wholesalers, commercial lighting project companies and OEM and ODM customers. For emergency lighting products exported to overseas markets, FEITUO can provide the corresponding certification documents, test information and technical files based on the selected model and destination market. These materials can support supplier qualification, project submissions, import documentation preparation and product compliance assessment.

The final applicability of any certification depends on the actual product model, configuration, certification scope and the latest requirements of the destination country. Through clear, accurate and verifiable documentation management, FEITUO provides compliance support for overseas partnerships and product deliveries.